Inconel 718 Round Bar
Inconel Alloy Round Bars, which is oxidation invulnerable to 1800 Degree F in outside. We offer these things in staggering assessments, for example, Inconel Round Bars. Our Inconel round Bars is known as the most all around destroying safe material open today, which further discredits the improvement of grain limit floods that would crumble use hindrance.
Regardless, these Inconel Flat Bars is typically not suggested for raised temperature affiliation. Strengthening of our Inconel Threaded Bars in the wake of working is incited and ought to be performed at a temperature between 2050 Degree F and 2150 Degree F scanned for after by a smart spread in a checked air or in an influenced diminishing sprinkle shower.
A scramble of the domain of present or potential utilize these Inconel Hollow Bars is: Acetic ruinous/Acetic Anhydride, cellophane passing on, chlorine spargers, chlorination structures, circuit board scratching gear, complex risky/substance blends, fans and blowers. Our Inconel Hexagonal Bars can withstand inconceivably high temperatures and is isolating safe, which is other than given in this condition.
Specifications of Inconel 718 Round Bar
| Specifications | : | ASTM B166 / ASTM SB166 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.01 mm to 250 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Standard | Inconel 718 |
| UNS | N06718 |
| WERKSTOFF NR. | 2.4816 |
| JIS | NCF 718 |
| OR | ЭИ868 |
| EN | NiCr15Fe |
| GOST | МНЖМц 28-2,5-1,5 |
| BS | NA 13 |
| AFNOR | NC15FE11M |
Chemical Composition Of Inconel 718 Round Bars
| Grade | Cr | Mn | S | Cu | C | Si | Fe | Ni |
| Inconel 718 | 14.00 - 17.00 | 1.00 max | 0.015max | 0.50 max | 0.15 max | 0.50 max | 6.00 – 10.00 | 72.00 min |
Mechanical Properties Of Inconel 718 Round Bars
| Tensile Strength | Elongation | Density | Melting Point | Yield Strength (0.2%Offset) |
| Psi - 95,000 , MPa - 655 | 40 % | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 45,000 , MPa – 310 |
Other Types Of Inconel 718 Round Bars
| Inconel 718 Round Bars | Inconel 718 Round Rods | Inconel Alloy 718 Bars |
| Inconel Alloy 718 Hex Bars | UNS N06718 Alloy Forged Bars | Inconel 718 Threaded Bars |
| N06718 Alloy Bars | Inconel 718 Square Bars | Inconel 718 Bar |
| Inconel 718 Cold Drawn Bar | Alloy 718 Cold Drawn Rod | N06718 Alloy 718 Rods |
| Alloy 718 Polished Bars | 718® Inconel Bright Bars | 718 Alloy Flat Bar |
| UNS N06718 Alloy 718 Forged Rods | Inconel 718 Polished Rod | Inconel Alloy 718 Threaded Rods |
| 718 Inconel Hollow Bars | DIN 2.4816 Alloy Hexagonal Bar | Inconel 718 Bright Polished Bars |