Incoloy 825 Round Bar
Exotic Metal Alloys is a composite that is on an unfathomably basic estimation from the social event of austenitic chromium and nickel superalloys. This composite is immune to oxidation and use and suits each kind of condition and temperature. In any case, if we talk about Incoloy 825 bars, these bars are known best for their stunning properties and features which help them to withstand in essential temperature and condition. In like manner, if you are finding the most strong and recognized creators, by then Exotic Metal Alloys is the right decision for you. They are one of the major makers who offer the best idea of bars far and wide.
These Inconel 825 bars are offered to customers in different shapes and sizes as showed up by their bit of room and application essential. Being a manager among the best makers and suppliers we make these bars as shown by the national and all around subtleties and models. Subsequently, we should consider these bars express in detail.
These Inconel bars join ASTM B425 and ASME SB425 central focuses and estimations merge ASTM, API and ASME checks. The level of these bars changes from 5mm to 500mm in pack transversely completed at any rate its length contrasts from 100mm to 6000mm and all custom size as showed up by the eagerness of customers. Not simply this, these bars join cleaned, decay and astounding surface wrapping up. These bars are open to customers in different structures and shapes like round, square, billet and restricting.
All Incoloy 825 bars go over various tests and reviews so as to check the quality and nature of bars. Also, when these bars are set up for the improvement, these bars are full in best nature of wooden cases or boxes or beds to shield bars from rusting.
Specifications of Incoloy 825 Round Bar
| Specifications | : | ASTM B425 / ASTM SB425 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.01 mm to 250 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| STANDARD | WERKSTOFF NR. | UNS | AFNOR | JIS | BS | GOST | EN |
| Incoloy 825 | 2.4858 | N08825 | NFE30C20DUM | NCF 825 | NA 16 | ЭП703 | NiCr21Mo |
Chemical Composition Of Incoloy 825 Round Bars
| Element | Incoloy 825 |
| C | 0.05 max |
| Mn | 1.00 max |
| Si | 0.5 max |
| S | 0.03 max |
| Cu | 1.50 – 3.00 |
| Fe | 22.00 min |
| Ni | 38 -46 |
| Cr | 19.50 – 23.50 |
| Al | 0.02 max |
| Ti | 0.06 – 1.20 |
Mechanical Properties Of Incoloy 825 Round Bars
| Element | Incoloy 825 |
| Density | 8.14 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa – 220 |
| Elongation | 30 % |
Other Types Of Incoloy 825 Round Bars
| 825 Incoloy Hollow Bars | DIN 2.4858 Alloy Hexagonal Ba | Incoloy 825 Bright Polished Bars |
| N08825 Alloy Bars | Incoloy 825 Square Bars | Incoloy 825 Bar |
| Incoloy 825 Cold Drawn Bar | Alloy 825 Cold Drawn Rod | N08825 Alloy 825 Rods |
| Incoloy Alloy 825 Hex Bars | UNS N08825 Alloy Forged Bars | Incoloy 825 Threaded Bars |
| UNS N08825 Alloy 825 Forged Rods | Incoloy 825 Polished Rod | Incoloy Alloy 825 Threaded Rods |
| Alloy 825 Polished Bars | 825® Incoloy Bright Bars | 825 Alloy Flat Bar |
| Incoloy 825 Round Bars | Incoloy 825 Round Rods | Incoloy Alloy 825 Bars |