Inconel 600 Round Bar
Inconel Alloy Round Bars, which is oxidation invulnerable to 1800 Degree F in outside. We offer these things in staggering assessments, for example, Inconel Round Bars. Our Inconel round Bars is known as the most all around destroying safe material open today, which further discredits the improvement of grain limit floods that would crumble use hindrance.
Regardless, these Inconel Flat Bars is typically not suggested for raised temperature affiliation. Strengthening of our Inconel Threaded Bars in the wake of working is incited and ought to be performed at a temperature between 2050 Degree F and 2150 Degree F scanned for after by a smart spread in a checked air or in an influenced diminishing sprinkle shower.
A scramble of the domain of present or potential utilize these Inconel Hollow Bars is: Acetic ruinous/Acetic Anhydride, cellophane passing on, chlorine spargers, chlorination structures, circuit board scratching gear, complex risky/substance blends, fans and blowers. Our Inconel Hexagonal Bars can withstand inconceivably high temperatures and is isolating safe, which is other than given in this condition.
Specifications of Inconel 600 Round Bar
| Specifications | : | ASTM B166 / ASTM SB166 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.01 mm to 250 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Standard | Inconel 600 |
| UNS | N06600 |
| WERKSTOFF NR. | 2.4816 |
| JIS | NCF 600 |
| OR | ЭИ868 |
| EN | NiCr15Fe |
| GOST | МНЖМц 28-2,5-1,5 |
| BS | NA 13 |
| AFNOR | NC15FE11M |
Chemical Composition Of Inconel 600 Round Bars
| Grade | Cr | Mn | S | Cu | C | Si | Fe | Ni |
| Inconel 600 | 14.00 - 17.00 | 1.00 max | 0.015max | 0.50 max | 0.15 max | 0.50 max | 6.00 – 10.00 | 72.00 min |
Mechanical Properties Of Inconel 600 Round Bars
| Tensile Strength | Elongation | Density | Melting Point | Yield Strength (0.2%Offset) |
| Psi - 95,000 , MPa - 655 | 40 % | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 45,000 , MPa – 310 |
Other Types Of Inconel 600 Round Bars
| Inconel 600 Round Bars | Inconel 600 Round Rods | Inconel Alloy 600 Bars |
| Inconel Alloy 600 Hex Bars | UNS N06600 Alloy Forged Bars | Inconel 600 Threaded Bars |
| N06600 Alloy Bars | Inconel 600 Square Bars | Inconel 600 Bar |
| Inconel 600 Cold Drawn Bar | Alloy 600 Cold Drawn Rod | N06600 Alloy 600 Rods |
| Alloy 600 Polished Bars | 600® Inconel Bright Bars | 600 Alloy Flat Bar |
| UNS N06600 Alloy 600 Forged Rods | Inconel 600 Polished Rod | Inconel Alloy 600 Threaded Rods |
| 600 Inconel Hollow Bars | DIN 2.4816 Alloy Hexagonal Bar | Inconel 600 Bright Polished Bars |