Nickel 201 Round Bar
Exotic Metal Alloys Nickel Alloy 201 Round Bars, which usually sets aside a long exertion for nickel to be ousted from air. Nickel 201 round Bars is released into the air by power plants and garbage incinerators, where it will than settle to the ground or tumble down after reactions with raindrops. Nickel 201 Flat Bars can moreover wrap up in surface water when it is a bit of wastewater streams.
The greater bit of blends from Nickel 201 Threaded Bars that are released to nature will adsorb to residue or soil particles and become fixed in this way. In acidic ground nevertheless, Nickel 201 Hollow Bars will without a doubt end up being progressively flexible and it will every now and again flush out to the groundwater.
We do understand that high nickel obsessions with sandy soils from Nickel 201 Hexagonal Bars can unquestionably damage plants and high nickel centers in surface waters can reduce the advancement rates of green development.
Nickel 201 Triangular Bars, anyway they as a general rule make assurance from nickel eventually. In any case, Nickel 201 Bars isn't only great as an essential segment, where it can in like manner be risky when the most extraordinary conventional wholes are outperformed. Nickel 201 Rods is consistently used to give a cautious covering to various metals, and finely apportioned nickel is a driving force for hydrogenating vegetable oils.
Specifications of Nickel 201 Round Bar
| Specifications | : | ASTM B160 / ASTM SB160 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | LC-Ni 99 |
Chemical Composition Of Nickel 201 Round Bars
| Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.25 max | 0.01 min | 0.40 max | – | 99 min | – |
Mechanical Properties Of Nickel 201 Round Bars
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67,000 , MPa – 462 | Psi – 21,500 , MPa – 148 | 45 % |
Other Types Of Nickel 200 Round Bars
| Nickel Alloy 201 Hex Bars | UNS N02201 Alloy Forged Bars | Nickel 201 Threaded Bars |
| N02201 Alloy Bars | Nickel 201 Square Bars | Nickel 201 Bar |
| UNS N02201 Alloy 201 Forged Rods | Nickel 201 Polished Rod | Nickel Alloy 201 Threaded Rods |
| 201 Nickel Hollow Bars | DIN 2.4066 Alloy Hexagonal Ba | Nickel 201 Bright Polished Bars |
| Alloy 201 Polished Bars | 201® Nickel Bright Bars | 201 Alloy Flat Bar |
| Nickel 201 Round Bars | Nickel 201 Round Rods | Nickel Alloy 201 Bars |
| Nickel 201 Cold Drawn Bar | Alloy 201 Cold Drawn Rod | N02201 Alloy 201 Rods |