Monel 400 Sheets & Plates
Exotic Metal Alloys offers an epic dimension of Monel Alloy 400 Sheets Plates and Coils, where it is the commitment of our party individuals to look at these things for a completing defect all things considered accomplishing most amazing quietness of the customers.
Monel 400 Sheets is utilized for hydrocarbon and compound overseeing gear, marine structure, shafts, fittings, valves, siphons, gets, and warmth exchangers. These Monel 400 Plates is utilized in made plant contraption, for the reason that of its bewildering use restraint.
Monel 400 Coils shows first – rate use check and taking off quality in a blend of fundamental and acidic circumstances and it's especially fitting for diminishing conditions. The machinability of these Monel 400 Slatting Coils (UNS N04400) is hard as it works-toughens all through machining. At that point, Monel 400 Perforated Coils are other than being offered in various sizes and shapes to our clients. While these Alloy 400 Sheets has varying phenomenal conditions, it is a long way from the ideal metal.
The machinability of Alloy 400 Plates is poor in setting on their tendency to rapidly work – set. These Alloy 400 Coils could in like way be potentially welded, bound, and brazed, which other than has shocking mechanical properties at underneath zero temperatures. Quality and hardness Alloy 400 Slatting Coils gets stretched out with basically slight devastating of versatility or effect check.
Specifications of Monel 400 Sheets & Plates
| Grade | Monel Alloy 400 / UNS N04400 |
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mmetc |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Sheets, Plates, Coils, Slatting Coils, Perforated Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Specifications | ASTM B168 / ASME SB168 |
| Form | Shim Sheet, Foils, Rolls, Chequered Plate, Flats, Designer Sheet, Blank (Circle), Strip, Plain Sheet, Coils, Ring (Flange) etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Applications | Gas Processing, Specialty Chemicals, Pulp, Paper Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Industry |
| Standard | Monel 400 |
| UNS | N04400 |
| AFNOR | NU-30M |
| GOST | МНЖМц 28-2,5-1,5 |
| Werkstoff Nr. | 2.4360 |
| JIS | NW 4400 |
| BS | NA 13 |
| EN | NiCu30Fe |
Chemical Composition Of Monel 400 Sheets & Plates
| Grade | Si | S | C | Mn | Cu | Fe | Ni |
| Monel 400 | 0.50 max | 0.024 max | 0.30 max | 2.00 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties Of Monel 400 Sheets & Plates
| Element | Tensile Strength | Density | Melting Point | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | Psi – 80,000 , MPa – 550 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | 40 % |
Other Types Of Monel 400 Sheets & Plates
| Monel Alloy 400 Shim Sheet | UNS N04400 Alloy Plate | Monel 400 Flats |
| UNS N04400 Alloy 400 Shim Sheet | Monel 400 Polished Plates | Monel Alloy 400 Polished Sheets |
| N04400 Alloy Rolls | Monel 400 Perforated Sheet | Monel 400 Strip |
| Monel 400 Hot Rolled Plate (HR) | Alloy 400 Cold Rolled Sheet (CR) | N04400 Alloy 400 Circle |
| Alloy 400 Plain Sheet | 400 Monel Blank (Circle) | 400 Alloy Foils |
| Monel 400 Sheets | Monel 400 Plates | Monel Alloy 400 Coils |
| 400 Monel Slatting Coil | DIN 2.4360 Alloy Thin Sheet | Monel 400 Strips |