Incoloy 800/800H/800HT Sheets & Plates
Exotic Metal Alloys offers a broad quality assortment of Alloy 800/800H/800HT Sheets Plates and Coils, where our offered assortment is affirmed to be in dutifulness by methods for the global quality principles. Incoloy 800 Sheets is a nickel – iron – chromium compound by methods for good protection from oxidation, carburization at high temperatures and moderate quality. In power age, re – warmer and super – radiator tubing has connected with these Incoloy 800 Plates.
In the mean time, these Incoloy 800 Coils are protection from extended introduction to high temperatures. Incoloy 800H Sheets is a lot of useful as it maintains a steady development, in any event, when unprotected to taking off temp. In the interim, these Incoloy 800H Plates are additionally being offered in various sizes and shapes to our clients. Incoloy 800HT Coils perform well in sodium salt and other liquid salt conditions, with stress consumption breaking obstruction outperforming standard austenitic tempered steels.
Incoloy 800 Slatting Coils has incredible impervious to oxidation and carburization in high temperature conditions. Incoloy 800HT Perforated Coils has a confined science, inside the constraints of Incoloy 800H Perforated Coils, and requires a warmth treatment of 2100 Degree F (1149 Degree C) least. Composite 800HT Coils is likewise utilized for valves, fittings and different segments presented to destructive assault from 1100 Degree F to 1800 Degree F. Combination 800 Sheets Plates with a standard strengthen is suggested for administration under 1100 Degree F (600 Degree C).
Specifications of Incoloy 800/800H/800HT Sheets & Plates
| Specifications | : | ASTM / ASME SB 409 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Chemical Composition Of Incoloy 800/800H/800HT Sheets & Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Mechanical Properties Of Incoloy 800/800H/800HT Sheets & Plates
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Other Types Of Incoloy 800/800H/800HT Sheets & Plates
| Incoloy 800/800H/800HT Sheets | Incoloy 800/800H/800HT Plates | Inconel Alloy 800/800H/800HT Coils |
| Inconel Alloy 800/800H/800HT Shim Sheet | UNS N06800/800H/800HT Alloy Plate | Incoloy 800/800H/800HT Flats |
| Alloy 800/800H/800HT Plain Sheet | 800/800H/800HT Inconel Blank (Circle) | 800/800H/800HT Alloy Foils |
| N06800/800H/800HT Alloy Rolls | Incoloy 800/800H/800HT Perforated Sheet | Incoloy 800/800H/800HT Strip |
| Incoloy 800/800H/800HT Hot Rolled Plate (HR) | Alloy 800/800H/800HT Cold Rolled Sheet (CR) | N06800/800H/800HT Alloy 800/800H/800HT Circle |
| 800/800H/800HT Inconel Slatting Coil | DIN 2.4816 Alloy Thin Sheet | Incoloy 800/800H/800HT Strips |
| UNS N06800/800H/800HT Alloy 800/800H/800HT Shim Sheet | Incoloy 800/800H/800HT Polished Plates | Inconel Alloy 800/800H/800HT Polished Sheets |