Incoloy 801 Sheets & Plates
Exotic Metal Alloys offers a broad quality assortment of Alloy 801 Sheets Plates and Coils, where our offered assortment is affirmed to be in dutifulness by methods for the global quality principles. Incoloy 801 Sheets is a nickel – iron – chromium compound by methods for good protection from oxidation, carburization at high temperatures and moderate quality. In power age, re – warmer and super – radiator tubing has connected with these Incoloy 801 Plates.
In the mean time, these Incoloy 801 Coils are protection from extended introduction to high temperatures. Incoloy 801 Sheets is a lot of useful as it maintains a steady development, in any event, when unprotected to taking off temp. In the interim, these Incoloy 801 Plates are additionally being offered in various sizes and shapes to our clients. Incoloy 800HT Coils perform well in sodium salt and other liquid salt conditions, with stress consumption breaking obstruction outperforming standard austenitic tempered steels.
Incoloy 801 Slatting Coils has incredible impervious to oxidation and carburization in high temperature conditions. Incoloy 800HT Perforated Coils has a confined science, inside the constraints of Incoloy 801 Perforated Coils, and requires a warmth treatment of 2100 Degree F (1149 Degree C) least. Composite 800HT Coils is likewise utilized for valves, fittings and different segments presented to destructive assault from 1100 Degree F to 1800 Degree F. Combination 801 Sheets Plates with a standard strengthen is suggested for administration under 1100 Degree F (600 Degree C).
Specifications of Incoloy 801 Sheets & Plates
| Specifications | : | ASTM / ASME SB 409 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 801 | 1.4876 | N08801 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
Chemical Composition Of Incoloy 801 Sheets & Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 801 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
Mechanical Properties Of Incoloy 801 Sheets & Plates
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 801 | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Other Types Of Incoloy 801 Sheets & Plates
| Incoloy 801 Sheets | Incoloy 801 Plates | Inconel Alloy 801 Coils |
| Inconel Alloy 801 Shim Sheet | UNS N06801 Alloy Plate | Incoloy 801 Flats |
| Alloy 801 Plain Sheet | 801 Inconel Blank (Circle) | 801 Alloy Foils |
| N06801 Alloy Rolls | Incoloy 801 Perforated Sheet | Incoloy 801 Strip |
| Incoloy 801 Hot Rolled Plate (HR) | Alloy 801 Cold Rolled Sheet (CR) | N06801 Alloy 801 Circle |
| 801 Inconel Slatting Coil | DIN 2.4816 Alloy Thin Sheet | Incoloy 801 Strips |
| UNS N06801 Alloy 801 Shim Sheet | Incoloy 801 Polished Plates | Inconel Alloy 801 Polished Sheets |